作者：宫文峰1, 黄美发2, 张美玲1
作者单位：1. 桂林电子科技大学海洋信息工程学院, 广西 北海 536000;
2. 桂林电子科技大学广西先进设计与制造技术重点实验室, 广西 桂林 541004
关键词：倒装芯片键合机;模态分析;锺击测试;有限元法
摘要：
键合头是全自动倒装芯片键合机重要的功能运动部件，其主要功能是完成芯片的拾取、点胶和键合。键合头在高频高加速的往复多自由度运动中产生的振动和共振量直接影响芯片的键合精度，因此要求键合头应具有足够的刚度、强度和较好的动态特性。掌握键合头的模态特性及其影响因素之间的关系是自主研发高性能倒装芯片键合头的关键问题。为此，建立键合头模态特性研究系统模型，采用理论计算与实验测试相结合的方法研究键合头在安装工况下的模态特性，将ANSYS有限元仿真的结果与锤击模态试验的结果作一致性对比和分析，得到键合头准确的模态参数、刚度分布情况和影响因素。研究结果为多功能高密度芯片键合头的进一步结构优化和精度控制以及整机的防振、抑振等提供理论支撑和实验依据。
Modal characteristic research and experimental analysis of flip chip bonding head
GONG Wenfeng1, HUANG Meifa2, ZHANG Meiling1
1. School of Marine Information Engineering, Guilin University of Electronic and Technology, Beihai 536000, China;
2. ADMT Key Laboratory of Guangxi, Guilin University of Electronic and Technology, Guilin 541004, China
Abstract: Bonding head in FCB is one of the most important functional components used to deal with the process of chip picking,dispensing,and bonding.Since both resonance and additional vibration in bonding head directly affect the working precision,therefore,it is very meaningful to investigate its vibration characteristics.In order to develop high performance chip bonder,the modality characteristics of bonding head under the assembly condition are investigated by simulation calculation and experiment test.In this paper,the modal characteristic system model is established,and the theory of calculate modality and experimental modality are introduced.Experimental and theoretical analysis results were compared and discussed.Exact modal characteristics,weak link and its influential factors of bonding head are obtained.This research result provides a theoretical support and experiment reference for optimizing structure,preventing resonance and reduces vibration of bonding head.
Keywords: flip chip bonder;modal analysis;harmmering test;finite element method
2016, 42(11): 119-125 收稿日期: 2015-12-27;收到修改稿日期: 2015-12-27
基金项目: 国家自然科学基金（51365009，50865003）；十一五国家重大专项02专项（2012ZX02601）
作者简介: 宫文峰(1987-),男,山东泰安市人,工程师,硕士,研究方向为机械振动与CAE技术、微电子封装与组装技术、先进制造与精密测量技术。
参考文献
[1] REZA A.Semiconductor backend flip chip processing,insp-ection requirements and challenges[J].SEMI IEEE:IEMT,2002,(4):18-22.
[2] RILEY G A.Flip chip advantage for complex electronics in micro-systems[C]//Proceedings of the SPIE Conference on Micro-robotics and Micro-assembly,1999.
[3] GONG W F,HUANG M F,CHEN L L,et al.Dynamic characteristics analysis of the flip chip bonding head based on multiple working conditions[C]//International Conference on Electronic Packaging Technology.IEEE,2013:732-737.
[4] 宫文峰,黄美发.倒装键合机支撑板模态参数提取与实验验证[J].中国测试,2014,40(5):145-148,152.
[5] 蔡力钢,马仕明,赵永胜,等.重载摆角铣头模态分析与实验研究[J].振动与冲击,2011,30(7):250-255.
[6] MASSA F,TISON T,LALLEMAND B.Fuzzy modal analysis:prediction of experimental behaviors[J].Journal of Sound and Vibration,2009,322:135-154.
[7] KROMULSKI J,HOJAN E.An application of two experimental modal analysis methods for the determination of operational deflection shapes[J].Journal of Sound and Vibration,1996,196(4):429-438.
[8] PINTELON R,GUILLAUME P,SCHOUKEN J.Uncertainty calculation in (operational) modal analysis[J].Mechanical Systems and Signal Processing,2007(21):2359-2373.
[9] YING H Q,LIU J M,AO Q B,et al.Small rockets exciting Qian Tang great bridge for modal analysis[C]//17th IMAC,1999:2015-2060.
[10] 巨丽,李永堂.对击式液压锤理论与试验模态分析[J].机械工程学报,2009,45(1):273-281.
