您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>工业氧弹热量计电能标定装置研究

工业氧弹热量计电能标定装置研究

3702    2016-10-08

免费

全文售价

作者:莫晓山, 胡彪, 熊知明, 罗建明

作者单位:湖南省计量检测研究院, 湖南 长沙 410014


关键词:燃烧热;氧弹热量计;热容量;电能标定;电热修正系数;苯甲酸


摘要:

针对采用二级苯甲酸标定工业氧弹热量计热容量的不足,提出一种电能标定装置标定工业氧弹热量计的方法。先采用NIST苯甲酸(39j)标定的精密氧弹热量计,然后用精密氧弹热量计测试电能标定装置释放的电热量QE,并统计其消耗的电能量W,再综合推导出电热修正系数。修正后的电能标定装置标定工业氧弹热量计热容量,相对标准偏差为0.11%,所释放的电热量相对扩展不确定度为0.09%(k=2),符合二级苯甲酸的技术要求。该电能标定装置精度高,操作方便,环保且经济,可用于工业氧弹热量计的日常标定工作。


Study on electric energy calibration device of industrial oxygen bomb calorimeter

MO Xiaoshan, HU Biao, XIONG Zhiming, LUO Jianming

Hu'nan Institute of Metrology and Test, Changsha 410014, China

Abstract: Aimed at the disadvantage of using benzoic acid to calibrate the heat capacity of industrial oxygen bomb calorimeter, this paper proposed a calibration method based on electric energy calibration device. Firstly, NIST benzoic acid (39j) is used to calibrate the precision oxygen bomb calorimeter. Then the precision oxygen bomb calorimeter is used to test the electric heat QE and the electric energy W of electric energy calibration device, and the electric heating correction coefficient α can be calculated. Using the corrected electric energy calibration device to calibrate the heat capacity of industrial oxygen bomb calorimeter, the relative standard deviation is 0.11% and the expanded uncertainty is 0.09%(k=2). The electric energy calibration device has the advantages of convenient use and operation, high precision and low energy consumption. It can be used in the routine work of industrial oxygen bomb calorimeter calibration.

Keywords: combustion heat;oxygen bomb calorimeter;heat capacity;electric energy calibration;electric heating correction coefficient;benzoic acid

2016, 42(9): 72-76  收稿日期: 2016-3-20;收到修改稿日期: 2016-4-25

基金项目: 国家自然科学基金(61501469,61179005)

作者简介: 莫晓山(1964-),男,湖南长沙市人,高级工程师,硕士,从事热工仪器、煤质分析仪器研究及相关计量检测工作。

参考文献

[1] 燃烧热计量器具检定系统:JJG 2058-1990[S]. 北京:中国计量出版社,1990.
[2] 陈禹银. 苯甲酸燃烧热的研究(文献综述)[J]. 乐山师专学报(自然科学版),1990(S1):23-31.
[3] 胡日恒,安绪武,谈夫. 精密氧弹量热计及苯甲酸燃烧热的测定[J]. 化学学报,1981(S1):18-26.
[4] 孟凡敏,孙国华,李佳. 国家燃烧热基准的技术改造[J]. 化学分析计量,2004,13(6):83-85.
[5] JESSUP R S. Precise measurement of heat of combustion with a bomb calorimeter[M]. National Bureau of Standards Monograph 7 Issued,1960:114-125.
[6] 莫晓山,胡彪,许光平,等. 可燃物质热值测量仪-氧弹量热仪综述[J]. 计量技术,2014(2):23-26.
[7] 煤的发热量的测定方法:GB/T 213-2008[S]. 北京:中国标准出版社,2008.
[8] 莫晓山,胡彪,罗建明,等. 一种氧弹热量计电热标定装置:ZL201620021703.7[P]. 2016-08-17.
[9] 莫晓山,胡彪,熊知明,等. 一种电热标定装置的电热器:ZL201620019296.6[P]. 2016-08-17.
[10] 胡彪. 快速量热仪的研究与设计[D]. 长沙:湖南大学,2008.
[11] 氧弹热量计:JJG 672-2001[S]. 北京:中国计量出版社,2001.
[12] 倪育才. 实用测量不确定度评定[M]. 4版. 北京:中国计量出版社,2013:99-106.