作者：陈雪松, 薛靓

作者单位：中国测试技术研究院, 四川成都 610021

关键词：砝码; 国标; 采纳; 国际建议

摘要：

为使现行《砝码》国标和国际计量组织标准接轨,依据现行R111(2004)国际建议和现行砝码规程JJG 99-2006内容,我国重新制定的《砝码》新国标即将颁布实施。该文着重分析了《砝码》新国标对R111(2004)国际建议的采纳程度,这是我国标准化建设同国际接轨,迈向国际化的一个重大步骤。同时也指出了砝码国标与国际建议的不同之处,便于相关的厂家、计量工作人员及用户参考。

Discussion of accepting between new national standard of weights and OIML R111(2004) international recommendations

CHEN Xue-song, XUE Liang

National Institute of Measurement and Testing Technology, Chengdu 610021, China

Abstract: In order to make national standard of weights consistent with international recommendations, new weights national standard was constituted and was going to carry into execution according to JJG 99-2006 and OIML R111(2004).It analyzed accepting between new national standard and OIML R111 (2004), which is very important for standardization and internationalization.At the same time, the difference was indicated between national standard and international recommendation, which is convenient for correlative factory, measurement people and consumer.

Keywords: Weights; National standard; Accept; International recommendation

2009, 35(6): 25-27  收稿日期: 2009-4-3;收到修改稿日期: 2009-7-11

基金项目: 

作者简介: 陈雪松(1973-),男,工程师,主要从事力学研究工作。

参考文献

[1] JJG 99-2006,砝码[S].北京:中国计量出版社,2006.
[2] GB 4167-1984,1-5等砝码[S].北京:中国标准出版社,1984.
[3] OIML R111(2004)国际建议.
[4] 国家质量技术法规统一宣贯教材.砝码[M].北京:中国计量出版社,2007.
[5] 孙瑞娴.质量计量丛书砝码[M].北京:中国计量出版社,1992.