作者：鄢铃¹, 魏川¹, 王雄飞²

作者单位：1. 中国测试技术研究院, 四川成都 610021;
2. 杭州市质量技术监督检测院, 浙江杭州 310019

关键词：定量超声; 声速; SOS体模

摘要：

研制的声速体模(SOS体模)为医疗设备定量超声波骨密度仪(称QUS仪)提供了一个可靠实用的专用检定设备。采用了透声率相近的高声速材料和低声速材料厚度的改变以调节总的透过声速的方法,制成不同声速档次的声速材料,并做成四个声速档次的体模。经试验,该四种体模的声速范围在1 400~1 640 m/s内,接近并覆盖了QUS仪使用的声速范围,完全满足了声速检定的要求。该SOS体模的研制成功,为定量超声波骨密度仪提供了声速指标的一种检定手段,对定量超声波骨密度声速指标横向比较及保证检测的可靠性具有重要意义。

Study on standard phantom of ultrasonic bone densitometry

YAN Ling¹, WEI Chuan¹, WANG Xiong-fei²

1. National Institute of Measurement and Testing Technology, Chengdu 610021, China;
2. Hangzhou Institute of Quality Technology Supervision Inspection, Hangzhou 310019, China

Abstract: A SOS(speed of sound) phantom has been designed as a special verification device for the medical equipment, QUS (quantitative ultrasonic bone densitometry), which is reliable and practical.Four-stage SOS has been developed with different SOS materials.The SOS of the material was accommodated through changing the thickness of two SOS materials, one is high-grade speed of sound and the other is low-grade.The experimental results showed the SOS of the phantoms is from 1 443~1 666 m/s, which covered the SOS window of the QUS.Thus the phantoms provide a verification method for QUS, which made the performance comparison and reliable examination of the QUS possible.

Keywords: Quantity ultrasound; Speed of sound; SOS phantom

2009, 35(5): 18-20  收稿日期: 2009-3-27;收到修改稿日期: 2009-6-11

基金项目: 

作者简介: 鄢铃(1969-),男,工程师,主要从事医学计量设备的研究、开发工作。

参考文献

[1] GB/T 15261-2008,超声仿组织材料声学特性的测量方法[S].北京:中国标准出版社,2008.
[2] 冯 宇,周兆英.松质骨定量超声监测评估骨质疏松症[J].医疗卫生装备,2002(3):5-8.
[3] Michael P A,Audre M P,Craven J D,et al. Measurement of the velocity of ultrasound in the human femur iv vivo[J].Med.Phys.,1980(7):324-330.
[4] 薛 延.定量超声——种骨密度和骨强度测量的新技术[J].中国骨质疏松杂志,1999,3(4):72-77.
[5] 郭 勇.医学计量(上册)[M].1版.北京:中国计量出版社,2002.
[6] 《国防无损检测教材》编委会.超声检测[M].1版.北京:机械工业出版社,2006.
[7] 李国伟,陈亚珠.超速体模及性能测试[J].上海交通大学学报,1999,18(5):132-135.