作者：徐谦, 张洁, 文璧
作者单位：西南交通大学机械工程学院, 四川成都 610031
关键词：自动化仪器仪表与装置; 桥门式起重机; 限位控制; AT89C5131单片机; USB接口
摘要：
基于AT89C5131研制的桥门式起重机智能监控系统,能实时测量和记录桥门式起重机的作业参数,对起重机运动部件的位置和吊绳倾摆角度作限位防摇监控,所记录的违章操作数据可以通过USB接口传送到计算机,供管理人员查阅打印。结果证明,该系统操作简单,安装方便,工作稳定可靠,抗干扰性好,使用该系统可以有效地避免现场野蛮作业损坏起重机,具有广阔的应用前景。
Design of intelligent monitor and control system for overhead and gantry crane
XU Qian, ZHANG Jie, WEN Bi
School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China
Abstract: Intelligent monitor and control system for overhead and gantry crane, which was based by AT89C5131, could real-time measure the job parameter and register at the same time.The job parameter was included the moving parts of the crane and dip angle of the tilting cable.The data of operation error could be transmitted to the computer through the USB interface, consulted the printing for the administrative personnel.The application proves that the system is of advantages such as easy operation, convenient assemblage, stable, anti-jamming.The use of the system can effectively avoid the scene of the brutal damage to the operating cranes.This system which had the far-reaching scientific management will be widely applied.
Keywords: Instrumentation and automation devices; Overhead and gantry crane; Location control; AT89C5131; USB interface
2009, 35(5): 122-124,128 收稿日期: 2008-12-10;收到修改稿日期: 2009-3-7
基金项目:
作者简介: 徐谦(1983-),男,河南湘潭市人,硕士研究生,专业方向为测试计量技术。
参考文献
[1] 徐华中,冯 波.基于PDIUSBD12芯片的USB模块设计[J].武汉理工大学学报:信息与管理工程版,2008,30(2):226-227.
[2] 魏鲁原,崔 霞.基于PD IUSBD12的USB控制器的设计[J].电子技术,2007,Z1(7-8):45-47.
[3] 才永胜,李杏春,王占国.AT89C5131在USB设计中的应用[J].仪器仪表用户,2006,13(6):105-106.
[4] 王晓军,邵惠鹤.基于模糊的桥式起重机的定位和防摆控制研究[J].系统仿真学报,2005,17(4):936-939.
[5] 邵贝贝.单片机嵌入式应用的在线开发方法[M].北京:清华大学出版社,2004.
[6] 周立功.PDIUSBD12 USB固件编程与驱动开发[M].北京:北京航空航天大学出版社,2003.
[7] 许永和.USB外围设备设计与应用[M].北京:北京航空航天大学出版社,2002.
[8] Elnahrawy E. Ten emerging technologies that will change the world[J].Technology Review,2003,2(1):106.
[9] Akyildiz I F,Wireless W S. Sensor networks[J]. Computer Networks,2002,38(4):393-422.
