作者：王健1,2, 梁志剑1,2, 马铁华1,2
作者单位：1. 中北大学电子测试技术国家重点实验室, 山西 太原 030051;
2. 中北大学仪器科学与动态测试教育部重点实验室, 山西 太原 030051
关键词：容栅传感器;扭矩测试;数据采集;相位差
摘要：
为完成工程中强磁场、强辐射、小空间等恶劣环境下的扭矩测量,设计并实现基于LabVIEW的容栅扭矩测试系统,通过USB总线将LabVIEW开发的上位机软件与以容栅传感器为核心的测试电路进行连接,测试电路利用转动轴前后两端携带正弦波信号的两组容栅,将对扭矩的测量转换为对两路正弦波信号相位差的测量,上位机软件对大容量的测试数据进行采集与处理。恶劣环境下测量转速在1000~5000 r/min时的转动轴扭角,以理想环境下的扭角测量值作为给定标准值,发现在1000 r/min转速时相对误差最大,且相对误差6%。结果表明:该测试系统性能稳定可靠,测量准确度高,开发周期短,易于后期维护升级。
Design of capacitive grid torque testing system based on LabVIEW
WANG Jian1,2, LIANG Zhijian1,2, MA Tiehua1,2
1. National Key Laboratory for Electronic Measurement Technology, North University of China, Taiyuan 030051, China;
2. Key Laboratory of Instrumentation Science and Dynamic Measurement Ministry of Education, North University of China, Taiyuan 030051, China
Abstract: In order to measure the torque in project construction under severe environment like high-intensity magnetic field, intense radiation and small space, a capacitive grid torque testing system has been designed and implemented based on LabVIEW. PC software developed by LabVIEW has connected with test circuit with a capacitive grid transducer as its core part via an USB bus. Two groups of capacitive gratings at the front and rear ends of rotation axis are used to convert torque measurement to phase-difference measurement of two sine wave signals. Then, the tested data of large capacity is acquired and processed with the PC software. The torsional angle of rotation shaft is tested at 1000-5000 r/min in harsh conditions. The torsion angle tested in an ideal condition was set as standard value. The relative error reached the maximum when the speed is at 1000 r/min but no more than 6%. The result shows that this test system is stable and reliable with high measurement accuracy, short development cycle, and easy to maintain and upgrade.
Keywords: capacitive grate transducer;torque test;data acquisition;phase difference
2015, 41(11): 78-81 收稿日期: 2015-03-15;收到修改稿日期: 2015-05-17
基金项目:
作者简介: 王健(1990-),男,山西晋中市人,硕士研究生,专业方向为动态测试及智能仪器。
参考文献
[1] 王荣,蔡德元. 一种逆磁致伸缩扭矩传感器[J]. 现代科学仪器,1992(2):44-48.
[2] Son D, Lim S J, Kim C. Nocontact torque sensor using the difference of maximum induction of amorphous cores[J]. IEEE Transactions on Magnetics,1992(5):2205-2211.
[3] 文西芹,李纪明. 基于磁弹性效应的电动转向轴用新型扭矩传感器[J]. 仪表技术与传感器,2011(1):5-7.
[4] 张立勋,张今瑜. 一种大刚度传动轴的扭矩测量方法[J].机械与电子,1995(5):3-4.
[5] Lesco D J.数字式高速光学转矩仪[J].国外计量,1985(6):27-31.
[6] Turner J D. Development of a rotating-shaft torque sensor for automotive applications[J]. IEEE Proceeding,1988,135(5):334-338.
[7] 董全林,刘彬,张春熹,等. 一种利用激光多普勒技术测量扭矩的原理研究[J]. 计量学报,2004,25(1):47-49.
[8] 付永乐,靳鸿. 容栅式旋转轴动态扭矩测试系统研究[D].太原:中北大学,2012.
[9] 刘双红,靳鸿,陈昌鑫,等. 基于锁相环和PWM技术的容栅传感器微小扭矩信号测试方法[J]. 电子器件,2014(1):59-62.
[10] 刘双红,靳鸿,张海龙,等. 分离式差分结构容栅传感器转速扭矩测试系统[J]. 探测与控制学报,2013,35(5):49-52.
[11] 谢锐,马铁华,武耀艳,等. 嵌入式容栅传感技术及轴功率测试研究[J]. 仪器仪表学报,2012,33(4):844-849.
[12] 吴忠锴,梁志剑,马铁华,等. 基于LabVIEW的力学实验数据采集系统软件设计[J]. 制造业自动化,2012,34(22):126-128.
[13] 叶敦范,李星. 基于LabVIEW的多重相关法测量相位差研究[J]. 中国测试,2014,40(6):95-98.
[14] 陈树学. LabVIEW宝典[M]. 北京:清华大学出版社,2001:5-13.
