作者：唐怡怀1, 黄少染1, 牟春梅1,2
作者单位：1. 桂林理工大学土木与建筑工程学院，广西 桂林 541004;
2. 广西岩土力学与工程重点实验室，广西 桂林 541004
关键词：摄影测量;折射修正;三轴土样;精度分析
摘要：
将摄影测量法用于土工三轴试验，可获得土样形变场，但光线穿越压力室及水所产生的折射影响试验的精度。如何消除折射的影响，提高三轴土样变形测量的精度是该研究的核心。以附有标记点的硬质圆柱为研究模型，通过摄影测量的三轴模拟试验，建立折射修正模型对折射误差进行校正，获取三轴模型分别在空气中、注水压力室以及折射修正后三种情况下的轴向值与径向值，并以空气中三轴模型的游标卡尺测量值为“基准值”，分别将注水压力室和折射修正后所获取的模型尺寸测量值与“基准值”进行对比，分析折射对三轴模型的成像影响。结果表明：摄影测量法在空气中具有较高的测量精度，通过折射修正模型可以有效减少折射误差，经折射修正后径向平均误差为0.63%，轴向平均误差为0.23%，这与折射修正前的径向平均误差和轴向平均误差相比分别减少26.29%和3.09%；折射对三轴模型轴向与径向的影响不一致，轴向受折射影响不如径向显著，且三轴模型各方向受到的折射影响各不相同。
Accuracy analysis of photogrammetric triaxial model considering the influence of refraction
TANG Yihuai1, HUANG Shaoran1, MU Chunmei1,2
1. College of Civil and Architectural Engineering, Guilin University of Technology, Guilin 541004, China;
2. Guangxi Key Laboratory in Geotechnical Mechanics and Engineering, Guilin 541004, China
Abstract: The photogrammetric method was used in geotechnical triaxial test to obtain the dimensional deformation field of soil samples, but the refraction caused by the light passing through the pressure chamber and water would affect the accuracy of the test. How to eliminating the influence of refraction and improving the accuracy of triaxial soil deformation measurement is the key of the research. The authors used the hard cylinder with marked points as the research model, then established a refraction correction model to correct the refraction error through the three-axis simulation experiment of photogrammetry to obtain the axial and radial values of the triaxial model in air, water injection pressure chamber and after refraction correction. Besides, they defined the measured value of the vernier caliper of the triaxial model in the air as the “reference value”, compared the measured value of the model size obtained after the water injection pressure chamber and refraction correction with the “reference value”, and analyzed the influence of refraction on the imaging of the triaxial model. As shown in the results: Photogrammetry has high measurement accuracy in air. The refraction error can be effectively reduced through the refraction correction model. After refraction correction, the radial average error is 0.63% and the axial average error is 0.23%, which was reduced by 26.29% and 3.09% respectively compared with the radial average error and axial average error before refraction correction. The influence of refraction on the axial and radial directions of the triaxial model is inconsistent, the influence of refraction on the axial direction is not as significant as that on the radial direction, and the influence of refraction on each direction of the triaxial model is different.
Keywords: photogrammetry;refraction correction;triaxial soil sample;precision analysis
2022, 48(12):146-153 收稿日期: 2021-10-28;收到修改稿日期: 2022-01-25
基金项目: 国家自然科学基金项目(41867039)；广西自然科学基金项目(2020GXNSFAA297247)；广西岩土力学与工程重点实验室项目(2015-A-01-03)
作者简介: 唐怡怀(1997-),男,江西赣州市人,硕士研究生,专业方向为岩土工程及工程地质
参考文献
[1] 牟春梅, 杨警, 范兰杨, 等. 基于图像技术的三轴土样径向变形测量[J]. 科学技术与工程, 2021, 21(27): 11712-11718
[2] 黄少染. 摄影测量法在红黏土变形特性研究中的应用[D]. 桂林: 桂林理工大学, 2021.
[3] 许家宁, 邓亚虹, 徐召, 等. 三轴试验非饱和土体积变化测量方法综述[C]// 2018年全国工程地质学术年会, 2018.
[4] LIN H, PENUMADU D. Strain localization in combined axial-torsional testing on kaolin clay[J]. Journal of Engineering Mechanics, 2006, 132(5): 555-564
[5] GACHET P, GEISER F, LALOUI L, et al. Automated digital image processing for volume change measurement in triaxial cells[J]. Geotechnical Testing Journal, 2007, 30(2): 98-103
[6] RECHENMACHER A L. Grain-scale processes governing shear band initiation and evolution in sands[J]. Journal of the Mechanics and Physics of Solids, 2006, 54(1): 22-45
[7] RECHENMACHER A L, MEDINA-CETINA Z. Calibration of constitutive models with spatially varying parameters[J]. Journal of Geotechnical and Geo-environmental Engineering, 2007, 133(12): 1567-1576
[8] 林刚, 邵龙潭, 杨松, 等. 三轴试样变形数字图像测量折射影响分析[J]. 兰州大学(自然科学版), 2011, 47: 80-85
[9] 高军程, 郭莹, 贾金青, 等. 基于数字图像测量系统的饱和细砂渐进破坏特性研究[J]. 岩土学, 2016, 37(5): 1343-1350
[10] 赵博雅, 邵龙潭, 孙翔, 等. 基于数字图像测量技术的尾粉砂动三轴试验研究[J]. 实验力学, 2018, 33(2): 175-182
[11] ZHANG X, LI L, CHEN G, et al. A photogrammetry-based method to measure total and local volume changes of unsaturated soils during triaxial testing[J]. Acta Geotechnica, 2015, 10(1): 55-82
[12] ZHANG X, LI L, CHEN G, et al. Measuring unsaturated soil deformations during triaxial testing using a photogrammetry-based method[J]. Canadian Geotechnical Journal, 2016, 53(3): 472-489
[13] LI L, ZHANG X. Factors influencing the accuracy of the photogrammetry-based deformation measurement method[J]. Springer Berlin Heidelberg, 2019, 14(2): 559-574
[14] LI L, LI P, CAI Y, et al. Visualization of non-uniform soil deformation during triaxial testing[J]. Acta Geotechnica, 2021, 16(11): 1-16
[15] 蔡阳, 李林, 路毅. 三轴试样绝对体积测量方法研究[J]. 岩土工程学报, 2021, 43(12): 2300-2307
[16] 俞立平, 潘兵. 使用拍照手机的数字图像相关测量系统在实验力学教学中的应用[J]. 力学与实践, 2021, 43(2): 294-301
[17] 陈元义, 刘文白, 原媛, 等. 基于三维数字照相量测技术的风荷载作用下玻璃幕墙变形量测研究[J]. 中国测试, 2019, 45(6): 29-34
[18] 张青春, 王旺, 杨广栋. 基于多目立体视觉的机械臂智能控制系统设计[J]. 中国测试, 2020, 46(12): 79-85
[19] 秦志强, 张文阁, 蒋晓瑜, 等. 基于光线追踪的实时可交互计算生成集成成像方法[J]. 光子学报, 2019, 48(9): 99-107
[20] 周子良. 基于摄影测量的三轴试样变形特性研究[D]. 桂林: 桂林理工大学, 2020.
[21] 牟春梅, 周子良. 基于摄影测量的三轴试验测量研究[J]. 土工基础, 2021, 35(2): 207-211
[22] 吴浩杰. 基于图像测量的三轴土样变形特性研究[D] . 桂林: 桂林理工大学, 2021.
