作者:陶盼, 李瑞君, 王勇俊
作者单位:合肥工业大学仪器科学与光电工程学院,安徽 合肥 230009
关键词:激光测量系统;光束漂移;波纹管;流体分析
摘要:
在机床导轨几何误差测量中,空气折射率不均匀造成的光束漂移会降低激光测量系统的检测精度,测量距离越远,影响越大。基于此,该文提出一种波纹管和气泵均匀化空气折射率的方法,抑制光漂的发生。以四自由度激光测量系统为对象,首先分析光束漂移机理,确定影响空气折射率的主要因素为温度与压强,给出轴向最大允许温度与压强梯度;其次通过流体仿真选取合适的波纹管内径,最后搭建实验系统并在不同条件下进行实验测试。结果表明:利用该系统可使四自由度激光测量系统的光束稳定性提高50%以上。该方法的可行性和有效性得到了验证。
Beam drift suppression method and system for a 4 DOF laser measurement system
TAO Pan, LI Ruijun, WANG Yongjun
School of Instrument Science and Opto-electronic Engineering, Hefei University of Technology, Hefei 230009, China
Abstract: In the measurement of the geometrical error of linear guide, laser beam drift caused by uneven air refractive index will greatly decreases the accuracy of laser measurement system. The longer the measurement distance, the greater the impact. A method was proposed based on bellows and air pumps to homogenize the refractive index of air. The laser beam drift is suppressed from the source. Object of study is a 4 DOF laser measurement system. Firstly, the beam drift mechanism was analyzed, and the main factors affecting the refractive index of air are temperature and pressure. The maximum allowable temperature and pressure gradient in the axial direction were given. Then, the appropriate inner diameter of bellows was selected by computer simulation. Finally, an experimental system was established and experiments were conducted under different coniditions. Experimental results indicated that the stability of the 4 DOF laser measurement system can be increased by more than 50% through this system. The feasibility and effectiveness of this method were verified.
Keywords: laser measurement system;beam drift;bellows;fluid analysis
2021, 47(8):109-113 收稿日期: 2020-06-12;收到修改稿日期: 2020-08-09
基金项目: 国家重点研发计划(2017YFF0204800)
作者简介: 陶盼(1994-),女,安徽马鞍山市人,硕士研究生,专业方向为微纳米测量技术
参考文献
[1] 刘兴占, 梁晋文. 双光束补偿准直系统[J]. 计量技术, 1999(1): 12-15
[2] 郑洪, 王一刚. 基于激光准直瞄准的大直径测量系统的研究[J]. 仪器仪表学报, 2007, 28(4): 760-764
[3] 李田泽, 杨淑连, 李震梅. 高精度激光准直系统的研制与分析[J]. 半导体光电, 2009, 30(1): 150-152
[4] 胡新和, 杨博雄. 半导体激光准直仪及其激光束漂移补偿研究[J]. 光学与光电技术, 2007, 5(3): 25-27
[5] 匡萃方, 冯其波, 刘斌, 等. 一种共路补偿激光漂移的直线度测量方法[J]. 光电工程, 2005, 32(4): 32-34
[6] 由凤玲, 冯其波, 张斌. 基于共路光线漂移补偿的直线度测量[J]. 光学精密工程, 2011, 19(3): 515-519
[7] YOU F L, FENG Q B, ZHANG B, et al. A new method for measuring laser beam straightness error based on common path compensation[J]. Optoelectron Letters, 2009, 5(5): 383-386
[8] YOU F L, ZHANG B, FENG Q B. A novel laser straightness measurement method with beam bend compensation[J]. Optik-International Journal for Light and Electron Optics, 2011, 122(17): 1530-1534
[9] HUANG Y, FAN K, SUN W, et al. Low cost, compact 4-DOF measurement system with active compensation of beam angular drift error[J]. Optics Express, 2018, 26(13): 17185-17198
[10] 朱凡, 李颖先, 谭久彬. 高精度激光光束准直系统设计[J]. 光学精密工程, 2020, 28(4): 817-826
[11] 朱东济, 蔡红维, 高蓉. 基于贝叶斯推理的激光光斑漂移特性[J]. 激光与光电子学进展, 2017, 54(4): 275-279
[12] CHIN C S, NGOI B K A. Self compensated heterodyne laser interferometer[J]. International Journal of Advanced Manufacturing Technology, 2000, 16(3): 217-219
[13] 程知己, 黄强先, 应前程, 等. 自准直测量系统中离焦误差分析及修正[J]. 中国测试, 2020, 46(5): 7-12
[14] EDLÉN B. The Refractive Index of Air[J]. Metrologia, 2005, 2(2): 71-80