作者:易杰1, 罗素琳2, 郭众奇1, 邱成1, 刘海华1, 蔡燕强1
作者单位:1. 广西计量检测研究院,广西 南宁 530007;
2. 广西电网有限责任公司电力科学研究院,广西 南宁 530023
关键词:油浸式变压器;两表偏差;关键参数
摘要:
针对油浸式变压器温度测量装置没有国家计量检定技术规程或规范,电力系统对此装置的检测主要依据的DL/T 572—2010 和DL/T 1400—2015两规范中“两表偏差”技术参数分别为5 ℃和0.5 ℃相去甚远的现状,该文根据误差理论以及不确定分析等理论,对“两表偏差”的误差来源以及主要影响因素进行分析研究,提出“两表偏差”由“指针式温度计最大允许误差”进行确立的方法且进行实验验证,并应用到广西地方规范的起草和编制,同时为国家规程的起草编制和修订提供思路和参考。
Study on the key parameter establishment method and experiment of oil immersed transformer temperature measuring device
YI Jie1, LUO Sulin2, GUO Zhongqi1, QIU Cheng1, LIU Haihua1, CAI Yanqiang1
1. Guangxi Institute of Metrology and Testing, Nanning 530007, China;
2. Electric Power Research Institute of Guangxi Power Grid Co., Ltd., Nanning 530023, China
Abstract: As there is no national metrological verification technical regulations or specifications for oil-immersed transformer temperature measurement devices, the power system’s detection of this device is mainly based on the “two-meter deviation” technology in the two specifications DL/T 572—2010 and DL/T 1400—2015, the parameters are 5 ℃ and 0.5 ℃, which are far from each other. According to the error theory and uncertainty analysis theory, the error sources and main influencing factors of “two-meter deviation” are analyzed and studied, the method that “two-meter deviation” is established by “pointer thermometer maximum permissible error” is put forward and verified by experiments. The corresponding results are obtained and applied to the drafting and compilation of local norms in Guangxi. At the same time, it provides ideas and references for drafting and revising national regulations.
Keywords: oil transformer;two-meter deviation;key parameter
2021, 47(8):18-21 收稿日期: 2021-02-28;收到修改稿日期: 2021-04-09
基金项目:
作者简介: 易杰(1965-),男,广西南宁市人,高级工程师,主要从事热工仪器计量检测技术研究工作
参考文献
[1] 电力变压器运行规程: DL/T 572—2010[S]. 北京: 中国电力出版社, 2010.
[2] 油浸式变压器测温装置现场校准规范: DL/T 1400—2015[S]. 北京: 中国电力出版社, 2015.
[3] 李波, 李宇飞. 如何减小变压器测温装置两表偏差[J]. 决策与信息, 2014(6): 189-171
[4] 压力式温度计: JJG 310—2002[S]. 北京: 中国计量出版社, 2002.
[5] 童在林, 袁志文, 叶利. 一种有效减小变压器测温装置两表偏差值的校准方法[J]. 华东电力, 2010(6): 949-951
[6] 申莉, 薛生虎. 变压器用测温装置的校准方法研究[J]. 电测与仪表, 2014, 46(9A): 44-47
[7] 龚伟, 赖志刚, 张文颖, 等. 油浸式变压器绕组测温两表偏差异常分析及减小措施[J]. 江西电力, 2012, 36(3): 19-21
[8] 变压器用绕组温控器: JB/T 8450—2016[S]. 北京: 机械工业出版社, 2016.
[9] 测量不确定度评定与表示: JJF 1059.1—2012[S]. 北京: 中国质检出版社, 2012.
[10] 赵丽敏, 徐崇斌, 王元明, 等. 浅析电力变压器用的三种测温装置[J]. 山东工业技术, 2014(14): 130-131