作者：原鹏¹, 孙全德², 王恪典^1,3, 王勇勇¹

作者单位：1. 新疆大学机械工程学院，新疆 乌鲁木齐 830047;
2. 新疆维吾尔自治区特种设备检验研究院，新疆 乌鲁木齐 830000;
3. 西安交通大学机械工程学院，陕西 西安 710049

关键词：脉冲涡流;电压峰值;到峰时间;厚度评估;铁磁性材料

摘要：

压力管道局部减薄对工业生产造成重大安全隐患，因此用脉冲涡流技术评估带包覆层管道壁厚减薄极为重要。研究主要目的是找到一种有效且易于提取的信号特征以评估壁厚。利用Comsol仿真软件建立测厚有限元模型，分析脉冲涡流时域信号特征，提取检出电压信号峰值、到峰时间特征量，分析电压峰值、到峰时间和试件厚度之间的关系。同时通过20#碳钢阶梯板实验验证，实验结果表明：电压峰值特征量可以评估提离60 mm以下板件厚度变化，到峰时间和板厚呈线性关系，且不受提离变化影响。通过对比发现到峰时间特征量优于电压峰值，该特征量能有效地用于铁磁性材料的厚度检测，且检测范围大。

Research on thickness measurement of ferromagnetic materials with pulsed eddy current under large lift
YUAN Peng¹, SUN Quande², WANG Kedian^1,3, WANG Yongyong¹
1. College of Mechanical Engineering, Xinjiang University, Urumqi 830047, China;
2. Xinjiang Uygur Autonomous Region Special Equipment Inspection and Research Institute, Urumqi 830000, China;
3. College of Mechanical Engineering, Xi'an Jiaotong University, Xi’an 710049, China
Abstract: The local thinning of pressure pipelines poses a major safety hazard to industrial production, so it is extremely important to use pulse eddy current technology to evaluate the thickness reduction of coated pipelines. The main purpose of the research is to find an effective and easy-to-extract signal feature to evaluate wall thickness. The finite element model of thickness measurement was established by Comsol simulation software, the characteristics of the pulsed eddy current signal in the time domain were analyzed, the peak value of the detected voltage signal, the peak time characteristic quantity were extracted, and the relationship between the voltage peak value, the peak time and the thickness of the specimen was analyzed. At the same time, it was verified by 20# carbon steel ladder plate experiment. The experimental results show that the voltage peak characteristic value can evaluate the thickness change of the plate under 60 mm lift-off, and the peak time and the plate thickness show a linear relationship, and are not affected by the lift-off change. Through comparison, it is found that the peak time characteristic quantity is better than the voltage peak value. This characteristic quantity can be effectively used for thickness detection of ferromagnetic materials with a large detection range.
Keywords: pulsed eddy current;voltage peak;peak time;thickness evaluation;ferromagnetic material
2021, 47(4):14-18,61  收稿日期: 2020-07-16;收到修改稿日期: 2020-08-19
基金项目: 新疆维吾尔自治区科技援疆项目(2019E0239)
作者简介: 原鹏（1993-），男，甘肃定西市人，硕士研究生，专业方向为脉冲涡流无损检测研究
参考文献
[1] 句海洋, 王新华, 赵以振. 改进VMD钢质管道损伤信号提取算法研究[J]. 中国测试, 2020, 46(5): 100-107
[2] MANDACHE C, LEFEBVRE J H V. Transient and harmonic eddy currents: Lift-off point of intersection[J]. Ndt & E International, 2006, 39(1): 57-60
[3] 柯海, 徐志远, 黄琛, 等. 基于信号斜率的铁磁材料脉冲涡流测厚研究[J]. 仪器仪表学报, 2011, 32(10): 2376-2381
[4] CHENG W, KOMURA I. Simulation for the assessment of wall thinning using eddy current method[J]. American Institute of Physics, 2011, 1335(1): 372-379
[5] 王健, 傅迎光, 孙明璇, 等. 基于脉冲涡流检测技术的铁磁性材料厚度的测量[J]. 北京交通大学学报, 2012, 36(6): 133-136
[6] ANGANI C S, PARK D G, KIM C G, et al. The pulsed eddy current differential probe to detect a thickness variation in an insulated stainless steel[J]. Journal of Nondestructive Evaluation, 2019, 29(4): 248-252
[7] FAN M B, CAO B H, TIAN G Y, et al. Thickness measurement using liftoff point of intersection in pulsed eddy current responses for elimination of lift-off effect[J]. Sensors & Actuators A Physical, 2016, 251: 66-74
[8] 吴月东, 黄琛, 熊波, 等. 脉冲涡流测厚中的传感器提离效应补偿方法[J]. 舰船电子工程, 2015, 35(3): 123-125
[9] 王志春, 王玉玺. 脉冲涡流多层厚度检测与时频特征量提取[J]. 传感器与微系统, 2018, 37(1): 19-21
[10] 李喜文, 钱慧芳, 王戈. 脉冲涡流多层厚度检测与时频特征量提取[J]. 电子测量技术, 2018, 41(22): 32-35
[11] 燕芳, 丁东阳. 基于ANSOFT的脉冲涡流测厚系统仿真[J]. 计算机产品与流通, 2017(9): 240-240
[12] 赵桐, 彭斌. 基于脉冲涡流的金属薄板厚度检测研究[J]. 仪器仪表与传感器, 2020(1): 117-121
[13] 武新军, 黄琛, 丁旭, 等. 钢腐蚀脉冲涡流检测系统[J]. 无损检测, 2010, 32(2): 127-130
[14] 李浩然, 高斌, 张喜源, 等. 电磁热多物理耦合成像检测方法研究[J]. 中国测试, 2020, 46(12): 99-104