登录    |    注册

您好,欢迎来到中国测试科技资讯平台!

首页> 《中国测试》期刊 >本期导读>一种多功能热量表耐久性试验装置的设计与实现

一种多功能热量表耐久性试验装置的设计与实现

290    2020-01-19

免费

全文售价

作者:李晓鹏1, 吴波2, 孟涛1

作者单位:1. 中国计量科学研究院, 北京 100029;
2. 广州能源检测研究院, 广东 广州 511447


关键词:热量表;耐久性试验;温度交变;流量交变


摘要:

热量表作为热计量贸易结算的重要计量器具,其长期运行的稳定性和量值的准确度至关重要,耐久性试验是检验热量表长期运行可靠性的主要方法。设计并研制一套新型热量表耐久性试验装置,装置采用双供水系统与双试验管路的组合设计,实现4 000次交变式加速磨损试验,磨损强度达到相关欧洲标准要求。此外,通过结构化功能模块设计,使该装置还可进行2 400 h与300 h耐久性试验,满足不同试验需求。试验结果表明,研制的新装置不仅达到国际上对热量表耐久性试验磨损强度的新要求,还为新的热量表型式评价方法的推广实施提供了技术支撑。


Design and implementation of a durability testing device for multifunctional heat meter
LI Xiaopeng1, WU Bo2, MENG Tao1
1. National Institute of Metrology, Beijing 100029, China;
2. Guangzhou Institute of Energy Testing, Guangzhou 511447, China
Abstract: As an important measuring instrument for thermal measurement trade settlement, the long-term stability and measurement accuracy of the heat meter is very important, and durability experiments are the main means and methods to test the long-term operation of heat meter. A new experimental equipment for the durability of heat meter is designed and developed, the device adopts the combined design of double water supply system and double experimental pipeline, realizing 4 000 times of alternating acceleration wear experiments, and the wear intensity meets the relevant European standards. In addition, through the design of structured functional modules, the device can also be used to complete the 2 400 h and 300 h durability experiment to adapt to different experimental requirements. The experimental results show that the new device not only meets the international requirements for the experimental wear strength of the durability of heat meter, but also provides technical support for the promotion and implementation of the new type evaluation method of heat meter.
Keywords: heat meter;durability test;temperature alternation;flow alternation
2020, 46(1):93-98  收稿日期: 2019-05-05;收到修改稿日期: 2019-06-24
基金项目: 质量技术监督能力提升专项(ANL1808);质检公益性行业科研专项(201510003)
作者简介: 李晓鹏(1986-),男,北京市人,助理工程师,硕士,主要从事液体流量计量研究
参考文献
[1] 杜伟鹏, 陈果夫, 赵建亮. 超声波热量表在耐久性试验中失效模式及原因的分析[J]. 计量学报, 2014(z1):141-145
[2] NIKOVSKI P I, DINKOVA M G, NACHEV V G, et al. Flow sensor error analysis of heat meters after long term operation[C]//International Scientific-Technical Conference on Actual Problems of Electronics Instrument Engineering. IEEE, 2017.
[3] 赵玉敏, 许翠翠, 张天亮. 热量表耐久性试验的研究[J]. 计量技术, 2013(7):67-69
[4] 金志军. 热量表流量传感器耐久性试验综述[J]. 中国计量, 2012(5):72-73
[5] 热量表检定规程:JJG225-2001[S]. 北京:中国计量出版社,2002.
[6] Heatmeters:EN1434-2015[S]. Europe:The European Committee for Standardization, 2015.
[7] 侯国祥. 工程流体力学[M]. 北京:机械工业出版社, 2006.
[8] 次英. 流体力学与传热学基础[M]. 北京:科学出版社, 2016.
[9] 宋晓红. 热量表检定/校准装置的研究及应用[D]. 哈尔滨:哈尔滨工程大学, 2007.