登录    |    注册

您好,欢迎来到中国测试科技资讯平台!

首页>《中国测试》期刊>本期导读>工业机器人伺服系统测试技术发展与趋势

工业机器人伺服系统测试技术发展与趋势

215    2019-08-27

¥0.00

全文售价

作者:汤少敏1, 刘桂雄1, 林志宇1, 李小兵2

作者单位:1. 华南理工大学机械与汽车工程学院, 广东 广州 510640;
2. 工业和信息化部第五研究所, 广东 广州 510610


关键词:工业机器人;伺服系统;测试技术;智能化


摘要:

工业机器人伺服系统是工业机器人的核心部件,对其性能和可靠性进行有效、客观检测,有助于优化伺服系统性能及应用。该文首先介绍工业机器人伺服系统组成和技术发展,总结工业机器人伺服系统的测试内容,从单参数/性能测试、多参数/性能测试、智能测试3种测试模式对伺服系统测试技术进展进行系统分析,最后总结工业机器人伺服系统智能测试发展趋势。


Development and trend of industrial robot servo system testing technology
TANG Shaomin1, LIU Guixiong1, LIN Zhiyu1, LI Xiaobing2
1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China;
2. CEPREI, Guangzhou 510610, China
Abstract: The industrial robot servo system is the key component of industrial robot. It is helpful to optimize IRSS’s performance by testing its performance and reliability effectively, objectively and professionally. In this paper, the composition of industrial robot servo system and the technical development was firstly introduced, and the test content of industrial robot servo system was summarized, and then the technical progress of servo system testing technology was introduced and analyzed systematically, the development trend of industrial robot servo system intelligent testing was finally summarized.
Keywords: industrial robots;servo system;testing technology;intelligent
2019, 45(8):1-7  收稿日期: 2019-05-30;收到修改稿日期: 2019-07-02
基金项目: 广东省高端装备制造计划项目(2017B090914003)
作者简介: 汤少敏(1987-),女,广东珠海市人,博士研究生,专业方向为智能化检测与仪器研究
参考文献
[1] LI L. China's manufacturing locus in 2025:With a comparison of "Made-In-China 2025" and "Industry 4.0"[J]. Technological Forecasting and Social Change, 2018, 135:66-74
[2] 曲道奎.中国机器人产业发展现状与展望[J].中国科学院院刊, 2015, 30(3):342-346,429
[3] FAZLOLLAHTABAR H, AKHAVAN NIAKI S T. Fault tree analysis for reliability evaluation of an advanced complex manufacturing system[J]. Journal of Advanced Manufacturing Systems, 2018, 17(1):107-118
[4] 曹家鑫.一种高速重载码垛机器人的设计开发[D].天津:天津大学, 2012.
[5] 姜华.码垛机器人轨迹规划算法研究[D].上海:上海交通大学, 2014.
[6] ALSAYED Y M, MAAMOUN A, SHALTOUT A. High performance control of PMSM drive system implementation based on DSP real-time controller[C]//Proceedings of 2019 International Conference on Innovative Trends in Computer Engineering, 2019:225-230.
[7] 张新华,黄建,张兆凯,等.基于DSP和FPGA的高功率密度交流伺服驱动控制系统设计[J].微电机, 2017, 50(2):45-49
[8] LI Z, CHEN D H. Design and implementation of data acquisition system based on FPGA and high-speed AD[J]. Applied Mechanics and Materials, 2014, 556-562:1515-1519
[9] 刘大伟,王苏洲.基于ARM+DSP+FPGA的机器人多轴运动控制器的设计与研究[J].制造技术与机床, 2017(7):100-104+108
[10] TAGHIZADEH M, YARMOHAMMADI M J. Development of a self-tuning PID controller on hydraulically actuated stewart platform stabilizer with base excitation[J]. International Journal of Control Automation And Systems, 2018, 16(6):2990-2999
[11] BRUNNER D, KUANG A Q, LABOMBARD B, et al. Linear servomotor probe drive system with real-time self-adaptive position control for the Alcator C-Mod tokamak[J]. Review of Scientific Instruments, 2017, 88(7):073501
[12] ADHIKARY N, MAHANTA C. Sliding mode control of position commanded robot manipulators[J]. Control Engineering Practice, 2018, 81:183-198
[13] 严浩,白瑞林,朱朔.基于预测型间接迭代学习的SCARA机器人轨迹跟踪控制[J].计算机工程, 2017, 43(10):296-301,309
[14] LIN F J, CHEN S G, SUN I F. Intelligent sliding-mode position control using recurrent wavelet fuzzy neural network for electrical power steering system[J]. International Journal of Fuzzy Systems, 2017, 19(5):1344-1361
[15] MIRAFZAL B, SAGHALEINI M, KAVIANI A K. An SVPWM-based switching pattern for stand-alone and grid-connected three-phase single-stage boost inverters[J]. IEEE Transactions on Power Electronics, 2011, 26(4):1102-1111
[16] 孙振兴.交流伺服系统先进控制理论及应用研究[D].南京:东南大学, 2018.
[17] GOLL S A, KORNEEV V E, KARABANOV S M, et al. Optionally filling scalable complex of universal DC motor controllers and multisensory converters for mobile robotics[C]//2015 IEEE International Conference on Industrial Technology, 2015:392-398.
[18] MANIKANDAN R, ARULMOZHIYAL R. Intelligent position control of a vertical rotating single arm robot using BLDC servo drive[J]. Journal of Power Electronics, 2016, 16(1):205-216
[19] HONG D K, HWANG W, LEE J Y, et al. Design, analysis, and experimental validation of a permanent magnet synchronous motor for aArticulated robot applications[J]. IEEE Transactions on Magnetics, 2018, 54(3):1-4
[20] 吕学勤,韩聪.燃料电池焊接机器人异步电动机矢量控制[J].电源技术, 2016, 40(5):1023-1026
[21] YUAN T Q, WANG D Z, WANG X H, et al. High-precision servo control of industry robot driven by PMSM-DTC utilizing composite active vectors[J]. IEEE Access, 2019, 7:7577-7587
[22] WEN S H, QIN G Q, ZHANG B W, et al. The study of model predictive control algorithm based on the force/position control scheme of the 5-DOF redundant actuation parallel robot[J]. Robotics and Autonomous Systems, 2016, 79:12-25
[23] HALDER S, AGRAWAL A, AGARWAL P, et al. Resolver based position estimation of vector controlled PMSM drive fed by matrix converter[C]//20162nd IEEE International Innovative Applications of Computational Intelligence on Power, Energy and Controls with Their Impact on Humanity, 2016:68-72.
[24] SHI B H, TIAN S P. A transmission algorithm applicable to incremental and absolute encoder and its implementation[C]//20172nd International Conference on Advanced Robotics and Mechatronics, 2017:299-304.
[25] ZHANG Z J, NI F L, DONG Y Y, et al. A novel absolute magnetic rotary sensor[J]. IEEE Transactions on Industrial Electronics, 2015, 62(7):4408-4419
[26] 莫会成,闵琳.现代高性能永磁交流伺服系统综述——传感装置与技术篇[J].电工技术学报, 2015, 30(6):10-21
[27] WANG M S, TSAI T M. Sliding mode and neural network control of sensorless PMSM controlled system for power consumption and performance improvement[J]. Energies, 2017, 10(11):1780
[28] ZHANG Z H,CHI C C,LIU J J,et al. The motor temperature rise test system based on magnetic powder dynamometer[J]. Advanced Materials Research, 2014, 998-999:495-498
[29] 陈良军,韩振江,付振斌,等.一种伺服电机动态响应的检测装置:201720560522.6[P].2017-12-12.
[30] SCHRAMM A, SWOROWSKI E, ROTH-STIELOW J. Methods for measuring torque ripples in electrical machines[C]//2017 IEEE International Electric Machines and Drives Conference, 2017.
[31] FERRARIS L, FRANCHINI F, POSKOVIC E. The cogging torque measurement through a new validated methodology[J]. 201711th IEEE International Conference On Compatibility, Power Electronics And Power Engineering (CPE-POWERENG), 2017:398-403.
[32] BRAMERDORFER G, ANDESSNER D. Accurate and easy-to-obtain iron loss model for electric machine design[J]. IEEE Transactions on Industrial Electronics, 2017, 64(3):2530-2537
[33] RA J A, SEBASTIAN T, WANG M Q. Online stator inductance estimation for permanent magnet motors using PWM excitation[J]. IEEE Transactions on Transportation Electrification, 2019, 5(1):107-117
[34] 周鹏.异步电机自动测试系统研究[D].大连:大连交通大学, 2011.
[35] 陈华.交流伺服永磁同步电机机械性能测试系统的研究与设计[D].南宁:广西大学, 2013.
[36] 沈明炎,袁伟杰,肖娜丽,等.电机出厂综合测试系统量值溯源的校准[J].上海计量测试, 2017, 44(3):6-8,12
[37] 陈国茜,颜文俊.基于DSP的新型电参数测量仪设计[J].机电工程, 2012, 29(5):501-505
[38] 梁龙学,杜永文.基于FPGA的等精度转矩转速测试仪[J].自动化仪表, 2012, 33(2):76-79
[39] 林高翔.基于虚拟仪器技术的网络型电机测试系统软件设计[D].杭州:浙江大学, 2010.
[40] 姜文喜,张学成.基于以太网的分布式多总线伺服驱动及电机测试系统设计[J].微电机, 2014, 47(10):79-82
[41] 王玉强.伺服电机及驱动的网络化集成测试技术研究[D].哈尔滨:哈尔滨工业大学, 2012.
[42] AL-BADRI M, PILLAY P, ANGERS P. A novel algorithm for estimating refurbished three-phase induction motors efficiency using only no-load tests[J]. IEEE Transactions on Energy Conversion, 2015, 30(2):615-625
[43] 陈美晓.基于PMSM参数辨识的电机测试系统研究[D].哈尔滨:哈尔滨工业大学, 2017.
[44] 陈金钰.交流伺服系统测试参数的辨识算法研究[D].哈尔滨:哈尔滨工业大学, 2018.
[45] WANG C, HOU Y L, LIU R Z, et al. The identification of electric load simulator for gun control systems based on variable-structure WNN with adaptive differential evolution[J]. Applied Soft Computing, 2016, 38:164-175
[46] 税洋,尉建利,陈康,等.基于RBF神经网络的电动负载模拟器摩擦与间隙补偿方法研究[J].计算机测量与控制, 2017, 25(6):211-214
[47] ZHANG M, YANG B. A naive method of applying fuzzy logic to CMAC in electric load simulator[J]. Transactions of The Institute Of Measurement And Control, 2017, 39(10):1590-1599
[48] SATHIYASEKAR K, THYAGARAJAH K, KRISHNAN A. Neuro fuzzy based predict the insulation quality of high voltage rotating machine[J]. Expert Systems with Applications, 2011, 38(1):1066-1072
[49] ATTOUI I, OMEIRI A. Fault diagnosis of an induction generator in a wind energy conversion system using signal processing techniques[J]. Electric Power Components and Systems, 2015, 43(20):2262-2275
[50] 周强,司丰炜,修言彬. Petri网结合Dijkstra算法的并行测试任务调度方法研究[J].电子测量与仪器学报, 2015(6):920-927
[51] 范华丽,熊禾根,蒋国璋,等.动态车间作业调度问题中调度规则算法研究综述[J].计算机应用研究, 2016, 33(3):648-653
[52] 王远航,李小兵,黄创绵,等.伺服电机可靠性测试系统:201621226909.X[P].2016-11-15.
[53] 徐连胜.伺服电机可靠性测试装置:201720819923.9[P].2017-07-07.
[54] 王哲.被动式力矩伺服系统加载策略研究[D].哈尔滨:哈尔滨工业大学, 2015.