作者：赵玮1, 王强2, 何晓晖2
作者单位：1. 陆军工程大学国防工程学院, 江苏 南京 210007;
2. 陆军工程大学野战工程学院, 江苏 南京 210007
关键词：工程机械;底盘测功机;动力性能;挂车
摘要：
为减小测功机自身损耗功率对底盘动力性能测量精度的影响，提出一种反拖模拟挂车测量测功机自身损耗功率的方法，测量结果用于对底盘损耗功率进行修正。对某型工程机械进行底盘动力性能测试和实验数据分析，评价机械底盘的传动效率与发动机的输出功率，结果表明，该方法有效地降低工程机械自重导致测功机自身损耗功率变化对底盘动力性能测试的影响，提高测量结果的精度，为工程机械底盘维修提供有力的数据支持。
Error analysis and method research of construction machinery chassis dynamic performance experiment based on dynamometer
ZHAO Wei1, WANG Qiang2, HE Xiaohui2
1. National Defense Engineering College, Army Engineering University of PLA, Nanjing 210007, China;
2. Field Engineering College, Army Engineering University of PLA, Nanjing 210007, China
Abstract: With the scope to reduce the influence of the dynamometer power loss on the chassis dynamic performance measuring accuracy, a reversing drag trailer based measuring method was proposed. This approach is capable of measuring dynamometer power loss in the process of reversing construction machinery and to refine the chassis power loss. A construction machinery was tested, and the chassis dynamic performance and the experimental analysis results on the chassis transmission efficiency and engine output power were evaluated. The results have shown that the proposed approach can reduce the influence of machinery mass on chassis dynamic performance, improve measuring accuracy, and support effective data for the chassis maintenance of wheel construction machinery.
Keywords: construction machinery;chassis dynamometer;dynamical property;trailer
2019, 45(5):151-156 收稿日期: 2017-12-10;收到修改稿日期: 2018-04-13
基金项目:
作者简介: 赵玮(1984-),男,山西太原市人,讲师,博士,研究方向为军用工程机械机电一体化技术
参考文献
[1] 赵玮, 王强, 李艳峰. 基于底盘测功机的轮式工程机械底盘动力性能测试[J]. 中国工程机械学报, 2011, 9(3):348-351
[2] 欧阳爱国, 毕鹏飞, 刘燕德. 基于转鼓实验的汽车传动效率的研究[J]. 制造业自动化, 2015, 37(10):78-81
[3] 郭正, 安相璧. 底盘测功机内部损耗功率补偿曲线的拟合[J]. 四川兵工学报, 2015, 36(5):109-111
[4] 欧阳爱国, 肖文龙, 陈齐平. 单滚筒底盘测功机对轮胎滚动阻力测定的精准度研究[J]. 中国测试, 2015, 41(8):13-16
[5] 龚志远, 刘志雄, 欧阳爱国. 单滚筒汽车发动机测功装置自身消耗功率的测量方法研究[J]. 中国测试, 2015, 41(3):26-29
[6] GROVER P S. Modeling of rolling resistance test data[J]. Powder Technology, 2011(3):269-282
[7] CHELI F, BRAGHIN F, BRUSAROSCO M, et al. Design and testing of an innovative measurement device for tyre-road contact forces[J]. Mechanical Systems and Signal Processing, 2011, 25(6):1956-1972
[8] IRMESCU A, MIHON L, PRADURE G. Automotive transmission efficiency measurement using a chassis dynamometer[J]. International Journal of Automotive Technology, 2011, 12(4):555-559
[9] JACKSON M. Vehicle parasitic loss and drive line efficiency test fixture and method:US 7530263[P]. 2009-05-12.
[10] 罗建峰, 何永祥, 吴明. 汽车传动系阻力台架检测和评价方法[J]. 公路与汽运, 2014, 161(2):32-37
[11] 尹涛, 郑义. 底盘测功机行驶阻力设定方法的比较[J]. 小型内燃机与摩托车, 2014, 43(1):54-57
[12] ZHAO W, WANG Q, ZHAO H F. Application of improved grey forecast in fuzzy direct torque control system[J]. International Journal of Digital Content Technology and its Applications, 2012, 6(12):617-621
[13] YAO Z L, CAI B J. Research of the fuzzy controller of the direct torque control system[J]. Development & Innovation of Machinery &Electrical Products, 2008, 21(3):156-160
