作者：郑志刚, 欧阳义芳, 庄应烘

作者单位：广西大学物理科学与工程技术学院材料研究所, 广西南宁 530004

关键词：Maple; 相图计算; 二元合金

摘要：

本文简要介绍了相图的计算原理和过程以及Maple软件的特点。以二元相图为例,用Maple软件进行了Cu-Ag二元系合金的相图计算,计算结果与实验结果吻合良好,进一步展示了Maple软件在相图计算中应用的可能性。

Application of maple for calculation of phase diagram

ZHENG Zhi-gang, OUYANG Yi-fang, ZHUANG Ying-hong

Institute of Material Science, Guangxi University, Nanning, Guangxi 530004, China

Abstract: It is presented the principle and process of phase diagram of calculation and the characteristic of software Maple in this paper. According to the principle of phase diagram calculation, the software Maple is used to calculate the phase diagram of Ag-Cu binary system. The calculation results are in good agreement with the experimental results. It demonstrated the possible application of Maple in calculation of Phase diagram.

Keywords: Maple; Calculation of phase diagram; Binary alloy

2005, 31(5): 103-105  收稿日期: 2004-9-19;收到修改稿日期: 2004-12-8

基金项目: 

作者简介: 

参考文献

[1] 张羡夫.计算相图基础理论问题的证明[J].河北理工学院学报, 2002, 24, 18.
[2] 张圣弼, 李道子.相图原理计算及在冶金中的应用[M].北京:冶金工业出版社, 1986.
[3] 洪维恩.数学魔法师M aple6[M].北京:人民邮电出版社, 2001.
[4] 徐祖耀, 李麟.材料热力学[M].北京:科学出版社, 2001.
[5] Bjö rn Jonsson, John Ågren. Thermodynamic and Kinetic Aspects of Crystallization of Suppercooled Ag-Cu Liquids.
[6] J. L. Murrary, Metall. Trans.A, 1984, 15:261-268.
[7] 黎捷.在导数应用中的M aple[J].咸宁师专学报, 2002, 22, 6.