作者：谭佳丰, 傅攀

作者单位：西南交通大学机械工程学院, 四川 成都 610031

关键词：摩擦噪声; 信号分析; 工况监测

摘要：

作为当代三大主要污染源之一,噪声污染已成为一个世界性的问题并且引起了世人的关注。随着工业技术的发展,由物体摩擦产生的噪声污染也越来越严重。对摩擦噪声进行测量、研究和控制,从环境保护事业出发,是十分需要的;同时通过对摩擦噪声的信号分析,还可以深入了解摩擦机理,有助于改善摩擦条件和进行工况监测。

Signal testing and processing for frictional noise of mechanical equipment

TAN Jia-feng, FU Pan

School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China

Abstract: As the one of the three primary source of pollution,noise pollution has become worldwide problem and aroused earthling attention.With the development of industrial technology,noise pollution caused by body friction has been increasingly serious.For the sake of environmental protection,it is very necessary to measure,research and control the frictional noise.At the same time,with the analysis of this noise,we have a better understanding of mechanism for friction.It is also beneficial to the improvement on rubbing condition and the work condition monitoring.

Keywords: Frictional noise; Signal processing; Work condition monitoring

2006, 32(3): 45-47  收稿日期: 2005-4-25;收到修改稿日期: 2005-6-13

基金项目: 

作者简介: 

参考文献

[1] 高品贤.振动、冲击及噪声测试技术[M].成都:西南交通大学出版社,1992.
[2] 高品贤.测试信号分析处理方法与程序[M].成都:西南交通大学出版社,1999.
[3] 雷继尧,何世德,王嘉琛.工程信号处理技术[M].重庆:重庆大学出版社,1990.
[4] 周新祥.噪声控制及应用实例[M].北京:海洋出版社,1999.
[5] 卢天祥,杜润生.机械工程测试·信息·信号分析处理[M].武汉:华中理工大学出版社,1990.
[6] 胡广书.数字信号处理——理论、算法与实现[M].北京:清华大学出版社,1997.