作者:叶震宇
作者单位:无锡市计量测试中心, 江苏无锡 214031
关键词:垂直度; 固有导轨; 数显测高仪; 万能工具显微镜
摘要:
各机械行业迅速发展,对加工零件以及各种检具的形位公差的检测也越来越多,对垂直度的精密测量是其中一项重要内容。在实际工作中,我们也碰到过各种各样的垂直度测量,需要用不同的方法去完成,本文主要探讨如何利用固有导轨(数显测高仪、万能工具显微镜等)进行垂直度测量,并对测量数据进行分析及比对,认为能达到精密测量的要求。
Verticality measurement by use of inherent guide rail carries
YE Zhen-yu
Wuxi City Measurement Test Center, Wuxi 214031, China
Abstract: With rapid developing in mechnical field,test demands for examining part's shape and dimension error has become more and more.Among them,accurate verticality test is an important test.This test mainly discussed how to utilize the inherent guide to carry the vertical degree measurement with analysis of test data.This method meets the requirement for accurate measurement.
Keywords: Vertical degree; Inherent guide; Count and show the elevation indicator; Omnipotent tool microscope
2006, 32(5): 59-60,99 收稿日期: 2005-10-26;收到修改稿日期: 2006-1-7
基金项目:
作者简介:
参考文献
[1] 哈尔滨工业大学.长度计量手册[M].北京:中国科学出版社,1979.
[2] 国家计量局.几何量计量[M].北京:中国计量出版社,1989.
[3] 国家质量监督检疫总局.直角尺检定规程[M].北京:中国计量出版社,2004.
[4] 石玉珍.六项互换性基础标准汇编[M].北京:中国标准出版社,1987.
[5] 徐孝恩,朴大植.工厂精密测量指南[M].北京:中国计量出版社,1985.
[6] 栾桂芳.长度计量[M].北京:中国计量出版社,1987.